安裝 macOS 從零開始并不復雜，只要準備好工具并按步驟操作即可。首先，準備一個可工作的 Mac、至少 16GB 的 U 盤、穩定的網絡連接和足夠的時間；其次，推薦使用 Terminal 中的 createinstallmedia 命令創建可啟動安裝器；接著，通過 Recovery Mode 或 USB 安裝器進入安裝界面；然后使用 Disk Utility 格式化目標硬盤為 APFS 或 Mac OS Extended；最后按照提示完成安裝過程。

You just got a Mac with a blank hard drive, or maybe you're trying to reinstall macOS from scratch. Either way, installing macOS on an empty drive isn’t too complicated as long as you have the right tools and follow the right steps.

Prepare Your Tools and Environment

Before diving into installation, make sure you’ve got everything ready. You’ll need:

• A working Mac (to create the installer)
• A USB flash drive with at least 16GB of storage
• A stable internet connection
• Enough time — this can take 30 minutes to over an hour depending on your Mac model and connection speed

The main method is creating a bootable installer, which gives you more control, especially if there's no operating system currently installed. Apple provides tools like createinstallmedia in Terminal to help you turn a USB stick into a macOS installer.

Create a Bootable Installer (Optional but Helpful)

If your Mac doesn’t support Internet Recovery well or your internet is slow, it’s better to make your own installer. Here’s how:

1. Download the macOS installer from the App Store — look for something like "Install macOS Ventura" or the latest version.
2. Format your USB drive using Disk Utility: Use GUID partition map and format as Mac OS Extended (Journaled).
3. Open Terminal and use the createinstallmedia command — it looks something like:

   sudo /Applications/Install\ macOS\ Ventura.app/Contents/Resources/createinstallmedia --volume /Volumes/MyUSB

4. Wait for the process to finish — it takes about 20–30 minutes.

This might seem technical, but it’s straightforward once the files are downloaded. Don’t skip formatting the drive properly — that’s a common reason people run into issues here.

Install macOS from Recovery or Installer

Once you’ve got your installer ready (or if you’re using Internet Recovery), plug in the USB drive or hold down Command R while turning on your Mac to enter Recovery Mode.

From there:

• Choose “Reinstall macOS” if you’re using Recovery
• Or select the USB drive as the boot device by holding Option at startup

Then follow the on-screen instructions. One important step that often trips people up is formatting the target drive first using Disk Utility. If you're installing on a completely blank drive:

• Open Disk Utility from the installer or Recovery Mode
• Select the internal drive
• Click Erase
• Use APFS (or Mac OS Extended if needed) and give it a name like “Macintosh HD”

After that, continue with the installation. It’ll take some time to copy files, install, and restart.

That’s basically it. The whole process isn't too bad once you know what to do. Just don’t rush through formatting or skip checking your hardware compatibility — those are easy places to get stuck.

以上是如何在空白的硬盤驅動器上安裝macOS？的詳細內容。更多信息請關注PHP中文網其他相關文章！