Backend Development
Golang
How do I use the Lock() and Unlock() methods to protect a critical section of code in Go?
How do I use the Lock() and Unlock() methods to protect a critical section of code in Go?
Jun 23, 2025 pm 08:37 PM
The standard way to protect critical sections in Go is to use the Lock() and Unlock() methods of sync.Mutex. 1. Declare a mutex and use it with the data to be protected; 2. Call Lock() before entering the critical area to ensure that only one goroutine can access the shared resources; 3. Use defer Unlock() to ensure that the lock is always released to avoid deadlocks; 4. Shorten the operations in the critical area as much as possible to improve performance; 5. For scenarios where more reads and less writes, sync.RWMutex should be used to read operations through RLock()/RUnlock() and write operations through Lock()/Unlock() to improve concurrency efficiency.
When you need to protect a critical section of code in Go, using the Lock() and Unlock() methods from the sync.Mutex type is the standard approach. These methods help ensure that only one goroutine can access the protected section at any given time, preventing race conditions.
What is a Mutex in Go?
Go's sync.Mutex is a mutual exclusion lock used to synchronize access to shared resources across multiple goroutines. When a goroutine calls Lock() , it blocks until the mutex becomes available if it's already locked by another goroutine. Once done with the critical section, calling Unlock() releases the lock so others can proceed.
Here's how to declare and use a mutex:
var mu sync.Mutex
You typically embed this mutex alongside the data it protects. It's common to see this pattern when working with structs or global variables shared between goroutines.
How to Use Lock() and Unlock() Correctly
The most important thing is to always call Unlock() after finishing work in the critical section — even if an error occurs. A common practice is to use defer mu.Unlock() right after calling mu.Lock() .
Here's a basic example:
package main
import (
"fmt"
"sync"
)
var (
counter = 0
mu sync.Mutex
)
func increment(wg *sync.WaitGroup) {
defer wg.Done()
mu.Lock()
defer mu.Unlock()
counter
}
func main() {
var wg sync.WaitGroup
for i := 0; i < 1000; i {
wg.Add(1)
go increment(&wg)
}
wg.Wait()
fmt.Println("Final counter:", counter)
}In this example:
- Multiple goroutines try to increment a shared counter.
- The
mu.Lock()ensures only one goroutine can enter the critical section at a time. -
defer mu.Unlock()guarantees the lock is released even if something goes wrong inside the block.
Some key points:
- Always pair
Lock()andUnlock()together. - Preferring
Unlock()immediately after locking. - Avoid long-running operations inside a locked section — keep critical sections as short as possible.
Common Mistakes to Avoid
Even experienced developers sometimes make mistakes when managing locks. Here are a few pitfalls to watch out for:
- Forgetting to unlock : This leads to deadlocks. If one goroutine locks but never unlocks, other goroutines waiting on the same lock will be stuck forever.
- Double locking the same mutex : Calling
Lock()again on the same mutex without unlocking first causes a deadlock. - Copying a locked mutex : Go discourages copying values ??of types that contain mutexes. Doing so can break the synchronization logic silently.
To prevent these issues:
- Use
defer mu.Unlock()whenever possible. - Be careful when passing structs containing mutexes — pass by pointer instead of by value.
- Consider using tools like
-raceflag (go run -race) to detect race conditions during testing.
When to Use RWMutex instead
If your application has more read operations than writes, consider using sync.RWMutex . It allows multiple readers but gives exclusive access to a single writer.
- Use
RLock()/RUnlock()for reading. - Use
Lock()/Unlock()when writing.
This can significantly improve performance in read-heavy scenarios. But remember: a write lock blocks all reads, and a read lock blocks writes.
So in cases where:
- You have many concurrent readers,
- Writes are infrequent,
...using RWMutex might be a better fit than a regular Mutex .
Basically that's it.
The above is the detailed content of How do I use the Lock() and Unlock() methods to protect a critical section of code in Go?. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undress AI Tool
Undress images for free
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Clothoff.io
AI clothes remover
Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
What are the implications of Go's static linking by default?
Jun 19, 2025 am 01:08 AM
Go compiles the program into a standalone binary by default, the main reason is static linking. 1. Simpler deployment: no additional installation of dependency libraries, can be run directly across Linux distributions; 2. Larger binary size: Including all dependencies causes file size to increase, but can be optimized through building flags or compression tools; 3. Higher predictability and security: avoid risks brought about by changes in external library versions and enhance stability; 4. Limited operation flexibility: cannot hot update of shared libraries, and recompile and deployment are required to fix dependency vulnerabilities. These features make Go suitable for CLI tools, microservices and other scenarios, but trade-offs are needed in environments where storage is restricted or relies on centralized management.
How does Go ensure memory safety without manual memory management like in C?
Jun 19, 2025 am 01:11 AM
Goensuresmemorysafetywithoutmanualmanagementthroughautomaticgarbagecollection,nopointerarithmetic,safeconcurrency,andruntimechecks.First,Go’sgarbagecollectorautomaticallyreclaimsunusedmemory,preventingleaksanddanglingpointers.Second,itdisallowspointe
How do I create a buffered channel in Go? (e.g., make(chan int, 10))
Jun 20, 2025 am 01:07 AM
To create a buffer channel in Go, just specify the capacity parameters in the make function. The buffer channel allows the sending operation to temporarily store data when there is no receiver, as long as the specified capacity is not exceeded. For example, ch:=make(chanint,10) creates a buffer channel that can store up to 10 integer values; unlike unbuffered channels, data will not be blocked immediately when sending, but the data will be temporarily stored in the buffer until it is taken away by the receiver; when using it, please note: 1. The capacity setting should be reasonable to avoid memory waste or frequent blocking; 2. The buffer needs to prevent memory problems from being accumulated indefinitely in the buffer; 3. The signal can be passed by the chanstruct{} type to save resources; common scenarios include controlling the number of concurrency, producer-consumer models and differentiation
How can you use Go for system programming tasks?
Jun 19, 2025 am 01:10 AM
Go is ideal for system programming because it combines the performance of compiled languages ??such as C with the ease of use and security of modern languages. 1. In terms of file and directory operations, Go's os package supports creation, deletion, renaming and checking whether files and directories exist. Use os.ReadFile to read the entire file in one line of code, which is suitable for writing backup scripts or log processing tools; 2. In terms of process management, the exec.Command function of the os/exec package can execute external commands, capture output, set environment variables, redirect input and output flows, and control process life cycles, which are suitable for automation tools and deployment scripts; 3. In terms of network and concurrency, the net package supports TCP/UDP programming, DNS query and original sets.
How do I call a method on a struct instance in Go?
Jun 24, 2025 pm 03:17 PM
In Go language, calling a structure method requires first defining the structure and the method that binds the receiver, and accessing it using a point number. After defining the structure Rectangle, the method can be declared through the value receiver or the pointer receiver; 1. Use the value receiver such as func(rRectangle)Area()int and directly call it through rect.Area(); 2. If you need to modify the structure, use the pointer receiver such as func(r*Rectangle)SetWidth(...), and Go will automatically handle the conversion of pointers and values; 3. When embedding the structure, the method of embedded structure will be improved, and it can be called directly through the outer structure; 4. Go does not need to force use getter/setter,
What are interfaces in Go, and how do I define them?
Jun 22, 2025 pm 03:41 PM
In Go, an interface is a type that defines behavior without specifying implementation. An interface consists of method signatures, and any type that implements these methods automatically satisfy the interface. For example, if you define a Speaker interface that contains the Speak() method, all types that implement the method can be considered Speaker. Interfaces are suitable for writing common functions, abstract implementation details, and using mock objects in testing. Defining an interface uses the interface keyword and lists method signatures, without explicitly declaring the type to implement the interface. Common use cases include logs, formatting, abstractions of different databases or services, and notification systems. For example, both Dog and Robot types can implement Speak methods and pass them to the same Anno
How do I use the io package to work with input and output streams in Go?
Jun 20, 2025 am 11:25 AM
TheGoiopackageprovidesinterfaceslikeReaderandWritertohandleI/Ooperationsuniformlyacrosssources.1.io.Reader'sReadmethodenablesreadingfromvarioussourcessuchasfilesorHTTPresponses.2.io.Writer'sWritemethodfacilitateswritingtodestinationslikestandardoutpu
How do I use string functions from the strings package in Go? (e.g., len(), strings.Contains(), strings.Index(), strings.ReplaceAll())
Jun 20, 2025 am 01:06 AM
In Go language, string operations are mainly implemented through strings package and built-in functions. 1.strings.Contains() is used to determine whether a string contains a substring and returns a Boolean value; 2.strings.Index() can find the location where the substring appears for the first time, and if it does not exist, it returns -1; 3.strings.ReplaceAll() can replace all matching substrings, and can also control the number of replacements through strings.Replace(); 4.len() function is used to obtain the length of the bytes of the string, but when processing Unicode, you need to pay attention to the difference between characters and bytes. These functions are often used in scenarios such as data filtering, text parsing, and string processing.
