KERNEL\_DATA\_INPAGE\_ERROR Blue screen errors are usually caused by hard disk read and write exceptions, memory problems, driver incompatibility or system files corruption. Solutions include: 1. Run the chkdsk command to check hard disk errors and fix them; 2. Use CrystalDiskInfo to view the hard disk status, and replace the SATA cable or interface if necessary; 3. Re-plug and unplug the memory module and use the Windows memory diagnostic tool to detect; 4. Update or roll back drivers that may have problems, especially storage controllers and graphics card drivers; 5. Run the sfc /scannow and DISM commands to repair system files and check whether the virtual memory settings are correct; 6. If you use the Ghost system, it is recommended to reinstall the official original system to avoid compatibility issues. Checking one by one in order can effectively solve most of these blue screen problems.

KERNEL_DATA_INPAGE_ERROR is one of the common blue screen errors in Windows systems and is usually related to the system's inability to read the required data from the hard disk. The problem may be on the hard disk, memory, driver, or system files. Although it seems scary, it is mostly possible to solve. Below are some practical troubleshooting and repair methods.

Check if there is any problem with the hard drive

The most common cause of this error is that there is a bad channel or a read and write exception on the hard disk. This error will be triggered especially when the system needs to load the critical page file but fails.

You can do this:

• Run the chkdsk command : Open the command prompt as an administrator, enter chkdsk C: /f /r (C: for your system disk), and then follow the prompts to restart the computer for disk check.
• Check the hard disk status : You can use CrystalDiskInfo tools to check the SMART status of the hard disk to see if there is any warning message.
• Replace the hard disk connection cable or interface : If it is a desktop computer, you can try changing a SATA cable or changing a motherboard interface.

If you find that the hard disk has obvious abnormal noise and frequent lags, it is recommended to back up the data as soon as possible and consider replacing the hard disk.

Check memory problems

Poor contact or damage to the memory stick may also lead to this error. When Windows fails to try to access paging data in memory, KERNEL_DATA_INPAGE_ERROR will be reported.

You can try:

• Re-plug and unplug the memory stick to clean up dust from the gold fingers
• Test memory using the Windows Memory Diagnostics tool that comes with Windows
• If it is dual channels or multiple memory, you can try to plug in only one test

Sometimes, incorrect memory frequency settings in the BIOS can also cause this problem, and restoring the default settings may be helpful.

Update or rollback the driver

If some hardware drivers (especially storage controllers, graphics cards, etc.) are incompatible or have bugs, they will also affect the stability of the system.

Common practices include:

• Open Device Manager, find the relevant hardware, right-click and select "Update Driver"
• If there is a problem after recently installing a new driver, you can try "rollback drivers"
• Pay special attention to the driver of NVMe SSD. Sometimes the version provided by the manufacturer's official website is more stable than the system comes with it.

If you are not sure which driver has a problem, you can try booting the system in Safe Mode, which can rule out the impact of most third-party drivers.

System files are corrupted or virtual memory settings are inappropriate

Corruption of the system core file may also lead to this error. In addition, virtual memory settings are too small or disabled, which may also cause problems.

you can:

• Run sfc /scannow and DISM /Online /Cleanup-Image /RestoreHealth in a command prompt to repair system files
• Check the virtual memory settings: Right-click "This Computer" → Properties → Advanced System Settings → Performance Options → Virtual Memory to ensure that the system-managed page files are not manually closed

In addition, if you are using a streamlined system (Ghost system), the probability of such errors is higher. It is recommended to reinstall the official original system.

Basically, these common reasons and methods are there. Start with the hard disk and memory, and then gradually troubleshoot driver and system problems. Although this type of blue screen problem is annoying, most of them can be solved as long as you take it step by step.

The above is the detailed content of How to fix KERNEL_DATA_INPAGE_ERROR in Windows?. For more information, please follow other related articles on the PHP Chinese website!