In Eloquent, records are deleted using delete(), truncate(), or soft deletes. To delete a single record, call delete() on the model instance or chain it from a query. For multiple records, build a query with where() and call delete(). Use truncate() to quickly remove all records without triggering events. Enable soft deletes by adding the SoftDeletes trait and use restore() or forceDelete() as needed. Always verify queries before execution to avoid unintended deletions.
You delete records in Eloquent by using methods like delete(), truncate(), or soft deletes, depending on your needs.
Deleting a single record
If you already have the model instance, just call delete() on it. For example:
$user = User::find(1); $user->delete();
This removes the record from the database completely. If you don’t have the instance yet, you can chain it directly from the query:
User::where('id', 1)->delete();One thing to be careful with: if you're deleting based on conditions other than primary key (like email or status), double-check your query so you don't remove more than intended.
Deleting multiple records at once
Sometimes you want to clean up old data or batch-delete entries. You can do this by building a query that matches multiple rows and calling delete():
User::where('created_at', '<', '2020-01-01')->delete();This deletes all users created before 2020. Again, make sure your where clause is correct — one typo and you might delete too much or too little. It’s often safer to test the query first with get() before running delete.
Also worth noting:
- This still triggers model events like
deletingif you have any observers or model boot logic. - If you're dealing with soft deletes, this will work as expected only if the model isn't already marked as deleted.
Using truncate for full table cleanup
If you need to wipe out all records quickly and reset auto-increment counters, use truncate():
User::truncate();
This is faster than deleting each row because it doesn’t run individual delete operations or fire model events. But it's also dangerous — no undo unless you have backups. Only use this when you really want to clear everything.
Soft deleting instead of permanent removal
By default, Eloquent allows you to "soft delete" records if you set up the deleted_at column in your table. To enable this, add the SoftDeletes trait to your model:
use Illuminate\Database\Eloquent\SoftDeletes;
class User extends Model
{
use SoftDeletes;
}Now when you call delete(), it sets the deleted_at timestamp instead of removing the row. To bring the record back:
$user->restore();
And to find soft-deleted models:
User::withTrashed()->find(1);
Or if you want to permanently delete even after soft deleting:
$user->forceDelete();
Just remember — once you force delete, it's gone for real.
That’s basically how deletion works in Eloquent. Whether you’re doing regular deletes, bulk actions, truncating, or using soft deletes, just make sure you understand what each method does before running it in production.
The above is the detailed content of How do I delete records from the database using Eloquent?. For more information, please follow other related articles on the PHP Chinese website!
Hot AI Tools
Undress AI Tool
Undress images for free
Undresser.AI Undress
AI-powered app for creating realistic nude photos
AI Clothes Remover
Online AI tool for removing clothes from photos.
Clothoff.io
AI clothes remover
Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!
Hot Article
Hot Tools
Notepad++7.3.1
Easy-to-use and free code editor
SublimeText3 Chinese version
Chinese version, very easy to use
Zend Studio 13.0.1
Powerful PHP integrated development environment
Dreamweaver CS6
Visual web development tools
SublimeText3 Mac version
God-level code editing software (SublimeText3)
Hot Topics
What are routes in Laravel, and how are they defined?
Jun 12, 2025 pm 08:21 PM
In Laravel, routing is the entry point of the application that defines the response logic when a client requests a specific URI. The route maps the URL to the corresponding processing code, which usually contains HTTP methods, URIs, and actions (closures or controller methods). 1. Basic structure of route definition: bind requests using Route::verb('/uri',action); 2. Supports multiple HTTP verbs such as GET, POST, PUT, etc.; 3. Dynamic parameters can be defined through {param} and data can be passed; 4. Routes can be named to generate URLs or redirects; 5. Use grouping functions to uniformly add prefixes, middleware and other sharing settings; 6. Routing files are divided into web.php, ap according to their purpose
What are policies in Laravel, and how are they used?
Jun 21, 2025 am 12:21 AM
InLaravel,policiesorganizeauthorizationlogicformodelactions.1.Policiesareclasseswithmethodslikeview,create,update,anddeletethatreturntrueorfalsebasedonuserpermissions.2.Toregisterapolicy,mapthemodeltoitspolicyinthe$policiesarrayofAuthServiceProvider.
How do I create new records in the database using Eloquent?
Jun 14, 2025 am 12:34 AM
To create new records in the database using Eloquent, there are four main methods: 1. Use the create method to quickly create records by passing in the attribute array, such as User::create(['name'=>'JohnDoe','email'=>'john@example.com']); 2. Use the save method to manually instantiate the model and assign values ??to save one by one, which is suitable for scenarios where conditional assignment or extra logic is required; 3. Use firstOrCreate to find or create records based on search conditions to avoid duplicate data; 4. Use updateOrCreate to find records and update, if not, create them, which is suitable for processing imported data, etc., which may be repetitive.
How do I run seeders in Laravel? (php artisan db:seed)
Jun 12, 2025 pm 06:01 PM
Thephpartisandb:seedcommandinLaravelisusedtopopulatethedatabasewithtestordefaultdata.1.Itexecutestherun()methodinseederclasseslocatedin/database/seeders.2.Developerscanrunallseeders,aspecificseederusing--class,ortruncatetablesbeforeseedingwith--trunc
What is the purpose of the artisan command-line tool in Laravel?
Jun 13, 2025 am 11:17 AM
Artisan is a command line tool of Laravel to improve development efficiency. Its core functions include: 1. Generate code structures, such as controllers, models, etc., and automatically create files through make: controller and other commands; 2. Manage database migration and fill, use migrate to run migration, and db:seed to fill data; 3. Support custom commands, such as make:command creation command class to implement business logic encapsulation; 4. Provide debugging and environment management functions, such as key:generate to generate keys, and serve to start the development server. Proficiency in using Artisan can significantly improve Laravel development efficiency.
How do I install Laravel on my operating system (Windows, macOS, Linux)?
Jun 19, 2025 am 12:31 AM
Yes,youcaninstallLaravelonanyoperatingsystembyfollowingthesesteps:1.InstallPHPandrequiredextensionslikembstring,openssl,andxmlusingtoolslikeXAMPPonWindows,HomebrewonmacOS,oraptonLinux;2.InstallComposer,usinganinstalleronWindowsorterminalcommandsonmac
How do I define methods (actions) in a controller?
Jun 14, 2025 am 12:38 AM
Defining a method (also known as an action) in a controller is to tell the application what to do when someone visits a specific URL. These methods usually process requests, process data, and return responses such as HTML pages or JSON. Understanding the basic structure: Most web frameworks (such as RubyonRails, Laravel, or SpringMVC) use controllers to group related operations. Methods within each controller usually correspond to a route, i.e. the URL path that someone can access. For example, there may be the following methods in PostsController: 1.index() – display post list; 2.show() – display individual posts; 3.create() – handle creating new posts; 4.u
How do I run tests in Laravel? (php artisan test)
Jun 13, 2025 am 12:02 AM
ToruntestsinLaraveleffectively,usethephpartisantestcommandwhichsimplifiesPHPUnitusage.1.Setupa.env.testingfileandconfigurephpunit.xmltouseatestdatabaselikeSQLite.2.Generatetestfilesusingphpartisanmake:test,using--unitforunittests.3.Writetestswithmeth
