Building a PC is equal parts exciting and frustrating. There's nothing quite like gaming on a new PC for the first time, but with so many components to think about, getting there is a challenge. While most hardware choice comes down to personal preference, one small detail you shouldn't overlook is RAM clearance.

What Is RAM Clearance?

RAM clearance is exactly what it sounds like: the physical vertical space between a stick of RAM and the CPU cooler. To be more specific, it's an air CPU cooler specification that refers to how tall a RAM stick it can accommodate.

This specification is important because oversized CPU coolers with dual heatsink designs overhang most of the RAM slots.

In fact, even slimmer single-slot air coolers will often overhang one or two slots (even with my old CPU cooler, which was mounted horizontally), especially if you use a push-pull configuration, where the first fan pushes cool air into the heatsink and the second fan pulls hot air out.

So, when choosing a CPU cooler, you check its RAM clearance, and when picking RAM, you check its height to make sure it's not over the maximum RAM clearance that your CPU cooler can accommodate. If the RAM is too tall, you won't be able to fit it underneath the CPU cooler, meaning you'll either need new RAM or a new cooler (though there are some workarounds that I'll get to later).

This is the clearance between my CPU cooler and RAM. Because I checked both the RAM height and my CPU cooler’s RAM clearance beforehand, I was able to achieve a snug fit. Of course, this isn't an issue with AIO coolers, as they use a CPU block that only goes over the CPU socket rather than a chunk of the motherboard. If you're liquid cooling, you can use the tallest RGB RAM in existence if you really want to show off your Las Vegas Strip-level lighting in your build.

However, if you're not liquid cooling and are thinking of an aftermarket air CPU cooler (which is what I almost always recommend), then you need to pay close attention to this important specification. Ignoring it could disrupt your entire build and ruin your whole week. Well, maybe I’m exaggerating a bit, but you get the point.

Related ##### Why I'll Never Use an AIO CPU Cooler

Air supremacy.

The most reliable way to check RAM clearance before buying a CPU cooler is to check the cooler's specs sheet on the manufacturer's website or on an online listing.

The ID-COOLING FROZN A620 cooler sets an excellent example for other manufacturers to follow by providing a visual guide in its marketing materials. It clearly shows the standard low-profile RAM clearance of 36 mm in the default configuration, as well as a 63 mm cutout option if you need to move the fan to accommodate taller RAM modules.

##### ID-COOLING FROZN A620

The ID-COOLING FROZN A620 is an affordable dual-heatsink CPU cooler that can handle CPU coolers with a TDP of up to 270W. While the fan-side has a standard 36mm of RAM clearance, the heatsinks have special cutouts that allow you to fit any RAM after moving the right fan to the left.

See at Amazon Expand Collapse However, while some manufacturers will happily boast about their amazing RAM clearance in all marketing materials, others will have you digging up Reddit and forum posts to find the figures. Ironically, that might be among the best ways to find information.

You might also find this information in reviews, though RAM clearance is often overlooked in favor of cooling performance across different workloads.

If your research yields no results, you might have to figure out RAM clearance on your own. If you have access to the cooler or can check it out in a store, take your most precise ruler and measure the height from the base plate to the fan or the lowest part of the heatsink. If that isn't an option either, look for a dimension diagram on the manufacturer's website and try calculating it yourself.

Once you know the clearance, compare it against the RAM's height to ensure you have enough clearance for it.

Related ##### Before I Build a PC, I Triple Check These Measurements

Measure twice, build once.

I know all this can sound overwhelming, especially if it's your first time building a PC, but don't worry. Most newer CPU coolers are designed to have at least around 35mm of RAM clearance, which is enough for standard-size RAM with simple heatsink designs. RAM is typically in the 30–35mm range. Really, the only time you can run into issues is with high-performance gaming RAM that features an elaborate heatsink design (with or without RGB).

Still, it's better to be safe than sorry. Checking that the RAM's height fits the CPU cooler's clearance for it only takes a few minutes, and it can save you from a world of pain.

Even if you end up with incompatible components and can’t return either, there are usually workarounds. For example, moving the overhanging fan slightly higher or even to the other side of the cooler often creates enough room.

However, if the heatsink itself is causing issues, you might consider mounting the cooler horizontally. It's not an ideal solution in terms of cooling efficiency, but I used a config like that for years in my old system without problems.

While you could cut the fins off with a Dremel tool as a last resort, I strongly advise against it. Fine metal particles inside the PC could cause dangerous short circuits. It’s usually much easier and safer to just sell the CPU cooler on Facebook Marketplace or exchange it for one that fits.

If you want to avoid the headache completely without committing to an AIO, just get a slim CPU cooler that doesn't overhang the RAM at all. While these smaller coolers might not perform as well as a bulky dual-heatsink model, they are still a powerful upgrade over the stock one. Not to mention that they're often cheaper.

One of the best such options on the market is the Noctua NH-U12S, which comes with a single fan positioned on the RAM side. You can easily add a second fan on the opposite side for even better cooling performance. If the price is too much, there's a cheaper Redux model available.

##### Noctua NH-U12S

The Noctua NH-U12S is a premium slim-tower air CPU cooler. Equipped with a high-performance NF-F12 120mm fan and NT-H1 thermal paste, it’s designed to keep your CPU cool while remaining virtually silent.

See at Amazon Expand Collapse ---

While RAM clearance isn't the most exciting of topics. Nevertheless, it's an important one. It's often something you'll have to check yourself, as even sites like PCPartPicker can't guarantee that a RAM kit and CPU cooler are compatible. Fortunately, this is something you can verify relatively easily by reviewing the manufacturer's website, reading reviews and forum posts, or measuring the components yourself if possible.

The above is the detailed content of Don't Make This Rookie PC Building Mistake With RAM. For more information, please follow other related articles on the PHP Chinese website!